ge water filter manufacturer, ge water filters wholesaler, ge water filter supplier, ge water filters factory

ge water filter

GE/Kenmore SmartWater Refrigerator Filter (GWF-3pack) Fits all all GE and Hotpoint refrigerators with built-in water filtration systems Can also be used to replace an older style metal filter with a GWF (requires sku GWFADAPTER) Water by Culligan (FXRC, FXRT, MXRC or HXRT), WR97X10006, or Kenmore 46-9905 Should be replaced every 6 months Special 3-pack means additional savings The GE GWF SmartWater Refrigerator filter fits all GE and Hotpoint refrigerators with built-in water filtration systems. This filter replaces old GE part numbers GWF01 (SmartWater), GWF06 (SmartWater Plus), and Hotpoint HWF. It improves the taste and odor of the water and removes the following impurities: 99.97% of Cysts, More than 85% of Particulates (Class I), 99% of Turbidity, 99% of Lead, 98% of Chlorine, 84% of 2,4-D (a common herbicide), 76% of Atrazine (a herbicide), 91% of Lindane (a pesticide), and 99% of Asbestos. GE recommends that you replace the filter every 6 months if your refrigerator is not equipped with a filter status indicator light OR if your refrigerator has a filter status light, the filter should be changed when the light comes on or after one year, whichever comes first OR if the refrigerator has not been used for more than two weeks (for instance, during a move) OR if you notice a decrease in the flow of water or objectionable tastes in the water or ice.

ge water filters

GE SmartWater Replacement Water Filter Set (FXSVC) Fits all GE SmartWater dual-stage drinking water filters Also fits other brands of housings that accept 9.75 x 2.5 inch filters GE GXSV10C, GNSV25CBL, GNSV30CWW, GNSV30CCC, GXSL03C, GNSL05CBL, and Culligan SY-2500 Interchangeable with GE FXSLC & Culligan D250 filters The GE SmartWater replacement filter set (FXSVC) fits all GE SmartWater dual-stage drinking water filters and many other brands of dual housing filters such as Culligan and OMNIFILTER, that accept 9.75 x 2.5 inch filters, and Culligan SY-2500. It is interchangeable with the GE FXSLC & Culligan D250 filters. When installing, the white filter with green ends goes in Position 1 (Closest to the inlet), and the other filter goes in Position 2. It removes the following impurities: 99% of Chemicals/VOCs, 90% of Mercury (6.5pH), 97% of Chlorine, 98% of Lead, 99.99% of Cysts, 99% of Turbidity, 99% of Asbestos, and Particulates 0.5-1.0 micron. It does not remove flouride. GE recommends that you replace the filter every 6 months OR after 600 Gallons of water have been filtered OR if your system monitor lights indicate replacement is required OR if you notice a decrease in the flow of water or objectionable tastes in the water.