Razor Wire
6" x 60". If for some reason, you find a better price on the same item. The company offers over 800 auto graphics for your car, boat or truck. We also do custom lettering, graphics, signs, banners, vehicle magnets and more.
Razor coil is a registered trademark of BOUNDARY FENCE & RAILING SYSTEMS, INC. We manufacture two types of razor coil - Galvanized & Stainless Steel. The loops are normally not clipped together in concertina fashion. This allows the razor coil to be installed in any distance between loops, depending on the security desired, the most common being 18¡± or 450 mm.
Razor coil is manufactured in 3 diameters - 18¡± - 24¡± - 36¡± (450-600-750 MM). It is fabricated from A 1¡± (26MM) wide and 0.020 (0.50 MM) thick strip of G 90 galvanized material or 430 stainless steel. Clusters of 4 needle sharp barbs are located 4¡± (100 MM) on center around each coil loop. Each barb is 1.2 when measured from the center of the cluster. The coil is cold pressed 230o around A 0.091 (2.3 MM) diameter high tensile galvanized or stainless steel core wire.
When ordering the concertina each loop shall be clipped the adjacent loop 3- 5 -7 or 9 times equally spaced around the circumference to provide the concertina effect.